SUB-2000 GLOCK MAG COMPATIBLE

Kel-Tec’s semi-automatic Sub-2000 is a rifle chambered for pistol cartridges and can accept most double column handgun magazines. The Sub-2000 is classified as a “sub-rifle” because of its small size, light weight, and the use of a pistol cartridge. It is intended as a compliment to the handgun with which it would have full interchangeability in ammunition and magazines. Easily be disassembled for cleaning or inspection without tools, it is ideal for backpacking trips and situations where space and convenience are paramount. By rotating the barrel upwards and back, the Sub-2000 can be instantly reduced to a size of 16.25″ x 7″ for ease of storage. The Sub-2000 has a 3-position stock providing an adjustable LOP (13-14.25″), and two integrated Picatinny rails on the forend for mounting accessories. The ergonomic charging handle is located under the bolt tube for ambidextrous operation. It has a ghost ring rear sight and an adjustable front sight with a removable T6 6061 aluminum housing. This model comes with a 17-round magazine. It is compatible with Glock 17 mags.

SUB-2000 GLOCK MAG COMPATIBLE

Kel-Tec’s semi-automatic Sub-2000 is a rifle chambered for pistol cartridges and can accept most double column handgun magazines. The Sub-2000 is classified as a “sub-rifle” because of its small size, light weight, and the use of a pistol cartridge. It is intended as a compliment to the handgun with which it would have full interchangeability in ammunition and magazines. Easily be disassembled for cleaning or inspection without tools, it is ideal for backpacking trips and situations where space and convenience are paramount. By rotating the barrel upwards and back, the Sub-2000 can be instantly reduced to a size of 16.25″ x 7″ for ease of storage. The Sub-2000 has a 3-position stock providing an adjustable LOP (13-14.25″), and two integrated Picatinny rails on the forend for mounting accessories. The ergonomic charging handle is located under the bolt tube for ambidextrous operation. It has a ghost ring rear sight and an adjustable front sight with a removable T6 6061 aluminum housing. This model comes with a 17-round magazine. It is compatible with Glock 17 mags.

KSG

KEL-TEC KSG 12GA

Kel-Tec’s KSG is a simple and reliable pump action shotgun able to feed from either the left or right tube, with a manual feed side selector lever located behind the trigger guard. Each tube holds up to 6 shells for a total 12+1 capacity. The pump includes top and bottom Picatinny rails to mount accessories and optics. The soft rubber butt pad helps to tame recoil. The KSG receiver is made from hardened steel and the magazine tubes have been welded in place. The grip and stock assembly is made of glass reinforced nylon (Zytel) and is easily disassembled by pushing out two pins, which store in two holes in the grip when removed. It has built-in forward and rear sling loops, and includes a basic sling.

KSG

KEL-TEC KSG 12GA

Kel-Tec’s KSG is a simple and reliable pump action shotgun able to feed from either the left or right tube, with a manual feed side selector lever located behind the trigger guard. Each tube holds up to 6 shells for a total 12+1 capacity. The pump includes top and bottom Picatinny rails to mount accessories and optics. The soft rubber butt pad helps to tame recoil. The KSG receiver is made from hardened steel and the magazine tubes have been welded in place. The grip and stock assembly is made of glass reinforced nylon (Zytel) and is easily disassembled by pushing out two pins, which store in two holes in the grip when removed. It has built-in forward and rear sling loops, and includes a basic sling.

PMR 30

KEL-TECH PMR 30 22 WMR

The PMR-30 is a lightweight, full size pistol (.22WMR). The PMR-30 operates on a unique hybrid blow back/locked-breech system, allowing for the use of a wide variety of ammunition as it seamlessly adjusts depending on the pressure of the cartridge. It uses a flush fit, 30-round double stack Zytel nylon magazine with round count ports. The trigger is a crisp single action with an over travel stop. It has a thumb-activated ambidextrous safety lever. The slide locks back after the last shot and a manual slide lock lever is also provided. The slide and barrel are 4140 steel, the frame is 7075 aluminum. The grip, slide cover, trigger, mag release, and safety levers are glass reinforced nylon (Zytel). Other features include: dual opposing extractors for reliability, heel magazine release to aid in magazine retention, dovetailed aluminum front sight, Picatinny accessory rail under the barrel, urethane recoil buffer, and captive coaxial recoil springs. It has a fluted barrel for light weight and effective heat dissipation. PMR30 disassembles for cleaning by removal of a single pin.

PMR 30 FLAT DARK EARTH

KEL-TECH PMR 30 FLAT DARK EARTH 22 WMR

The PMR-30 is a lightweight, full size pistol (.22WMR). The PMR-30 operates on a unique hybrid blow back/locked-breech system, allowing for the use of a wide variety of ammunition as it seamlessly adjusts depending on the pressure of the cartridge. It uses a flush fit, 30-round double stack Zytel nylon magazine with round count ports. The trigger is a crisp single action with an over travel stop. It has a thumb-activated ambidextrous safety lever. The slide locks back after the last shot and a manual slide lock lever is also provided. The slide and barrel are 4140 steel, the frame is 7075 aluminum. The grip, slide cover, trigger, mag release, and safety levers are glass reinforced nylon (Zytel). Other features include: dual opposing extractors for reliability, heel magazine release to aid in magazine retention, dovetailed aluminum front sight, Picatinny accessory rail under the barrel, urethane recoil buffer, and captive coaxial recoil springs. It has a fluted barrel for light weight and effective heat dissipation. PMR30 disassembles for cleaning by removal of a single pin.

PMR 30

KEL-TECH PMR 30 22 WMR

The PMR-30 is a lightweight, full size pistol (.22WMR). The PMR-30 operates on a unique hybrid blow back/locked-breech system, allowing for the use of a wide variety of ammunition as it seamlessly adjusts depending on the pressure of the cartridge. It uses a flush fit, 30-round double stack Zytel nylon magazine with round count ports. The trigger is a crisp single action with an over travel stop. It has a thumb-activated ambidextrous safety lever. The slide locks back after the last shot and a manual slide lock lever is also provided. The slide and barrel are 4140 steel, the frame is 7075 aluminum. The grip, slide cover, trigger, mag release, and safety levers are glass reinforced nylon (Zytel). Other features include: dual opposing extractors for reliability, heel magazine release to aid in magazine retention, dovetailed aluminum front sight, Picatinny accessory rail under the barrel, urethane recoil buffer, and captive coaxial recoil springs. It has a fluted barrel for light weight and effective heat dissipation. PMR30 disassembles for cleaning by removal of a single pin.

PMR 30 FLAT DARK EARTH

KEL-TECH PMR 30 FLAT DARK EARTH 22 WMR

The PMR-30 is a lightweight, full size pistol (.22WMR). The PMR-30 operates on a unique hybrid blow back/locked-breech system, allowing for the use of a wide variety of ammunition as it seamlessly adjusts depending on the pressure of the cartridge. It uses a flush fit, 30-round double stack Zytel nylon magazine with round count ports. The trigger is a crisp single action with an over travel stop. It has a thumb-activated ambidextrous safety lever. The slide locks back after the last shot and a manual slide lock lever is also provided. The slide and barrel are 4140 steel, the frame is 7075 aluminum. The grip, slide cover, trigger, mag release, and safety levers are glass reinforced nylon (Zytel). Other features include: dual opposing extractors for reliability, heel magazine release to aid in magazine retention, dovetailed aluminum front sight, Picatinny accessory rail under the barrel, urethane recoil buffer, and captive coaxial recoil springs. It has a fluted barrel for light weight and effective heat dissipation. PMR30 disassembles for cleaning by removal of a single pin.